a06b-6250-h011
FANUC Servo/Spindle Unit A06B-6250-H011
A06B-6250-H011 is an A06B unit the seller's shop lists as a servo/spindle unit — a combined module carrying both drive roles. This page records the combined listing and what it means in the cabinet.
What A06B-6250-H011 is
A06B-6250-H011 is listed by the seller's shop as a servo/spindle unit: one A06B module that serves a servo axis and the spindle together. It is the second combined listing in the catalogue, alongside the A06B-6110-H015, and like that unit it is shelved under both the servo and spindle families because that is the work it does.
Combined units concentrate risk and value in one box. When one fails, the machine can lose an axis and its spindle to a single module — which is why this number's page spends its space on presentation patterns and testing rather than on description.
Where A06B-6250-H011 works
The unit sits between the control and two motors — a servo motor on one channel and the spindle motor on the other — drawing on the common power supply. Its fault presentations sort into three: axis only, spindle only, or a disturbance across both. The third is the combined unit's fingerprint, and naming it in an inquiry points the desk at this module immediately.
Single-side presentations need the chain checked on that side first: motor, feedback, cabling. The desk asks those questions for this number as a matter of course, because replacing a two-role unit for a one-sided peripheral fault is the expensive error this page is written to prevent.
Pairing evidence helps on this number as much as on the servo shelf: the spindle motor's rating-plate details, quoted with the amplifier number, let the desk confirm the two were specified together. A spindle amplifier answered against its motor's plate is a firmer answer than one given against the amplifier's label alone, and it costs the buyer one extra line in the inquiry.
Condition options for A06B-6250-H011
The shop listing fixes the unit's identity as a servo/spindle unit; the condition of the shelf unit is stated on inquiry, in the seller's usual range. For a combined module, buyers weigh condition against test evidence more than against the word itself: a used unit with a full two-channel bench run behind it is a different proposition from an untested one at the same word.
The condition ladder, the seller's warranty terms (1 year new, 3 months used), and the test-video option are all set out on the used FANUC parts page and apply to this number without variation.
Testing A06B-6250-H011 before dispatch
Both channels are exercised on the test bench before this unit is described as tested — servo side and spindle side, each under the standard goods test. A single-channel pass is half a test for a two-role unit, and the bench record for this number is kept accordingly.
Returned units go through repair diagnosis with the same two-sided discipline: the fault is located to a channel and a stage, and the quotation covers the restoration of the unit as a whole, not merely the channel that presented.
Ordering A06B-6250-H011
Quote A06B-6250-H011 in full, name the machine, and state the presentation — axis, spindle, or both — with the symptom as displayed. If the purchase is a preventive spare for a machine that cannot afford this unit's failure, say so plainly; the desk will answer around condition and two-channel test evidence, which is the substance of a spare-buying decision.
Related pages
Send an inquiry
Send the part numbers you need, or the number of a unit you want assessed, with the machine each belongs to. One desk answers for the shelves and the bench.
Open the inquiry form