a06b-6110-h015
FANUC Servo/Spindle Drive Unit A06B-6110-H015
A06B-6110-H015 is an A06B drive unit the seller's shop lists as a servo/spindle drive unit — one module serving both drive roles. This page records the combined listing and its consequences for ordering.
What A06B-6110-H015 is
A06B-6110-H015 is listed by the seller's shop as a servo/spindle drive unit: a single A06B module that carries servo drive duty and spindle drive duty together. Combined units exist because compact drive cabinets package the chain tightly, and this number is one of the two combined listings in the catalogue, the other being the A06B-6250-H011.
Its dual role is why it appears on both the servo amplifiers and spindle amplifiers pages. A buyer who found it under either heading has found the same unit; there are not two versions of this number, one for each role.
Where A06B-6110-H015 works
In the machine, the unit answers to the control for both a feed axis and the spindle, drawing from the common power supply. A fault can therefore stop an axis, stop the spindle, or — the signature of a shared unit — disturb both at once. That third presentation is the one worth naming in an inquiry, because it points at the shared unit faster than either single symptom does.
When only one side presents, the chain on that side still deserves a pass: the servo motor or the spindle motor behind the unit, and the feedback path, imitate amplifier faults faithfully. The desk asks about the whole chain for this number as a matter of routine.
Condition options for A06B-6110-H015
The shop listing carries no single permanent condition word for this number; shelf units arrive in the seller's usual range — new, new-surplus, used — and the answer on inquiry names the condition of the unit actually held. Because a combined unit carries two roles, its condition statement matters twice over, and the tested evidence behind it matters more than the word itself.
The used FANUC parts page explains the ladder: what used means, what the seller's warranty covers on a used unit (3 months), and what a buyer can ask to see — the bench run and the test video — before committing to a unit with two jobs.
Testing A06B-6110-H015 before dispatch
A combined unit is tested as a combined unit: both drive roles are exercised on the test bench before dispatch, since a pass on one channel says nothing about the other. That two-sided test is the difference between a tested A06B-6110-H015 and a merely powered one, and it is the standard the desk applies to this number.
On the repair side, the bench diagnosis for a returned unit locates the fault to a role and a stage first. A repair that restores the servo side while the spindle side stays weak is not a completed repair of this unit, and the quotation is built accordingly.
Ordering A06B-6110-H015
Quote the full number, A06B-6110-H015, and state which role presented the fault — axis, spindle, or both — with the machine named. Buyers replacing proactively, before a failure, should say so: for a two-role unit, a tested shelf spare is a common strategy, and the answer can be framed around condition and test evidence rather than urgency.
Related pages
Send an inquiry
Send the part numbers you need, or the number of a unit you want assessed, with the machine each belongs to. One desk answers for the shelves and the bench.
Open the inquiry form