fanuc 0i mate controller
FANUC 0i Mate control units
The 0i Mate is the compact form of the Series 0i, fitted to smaller lathes and mills. Its units carry their own A02B numbers and are not substitutes for full 0i units; this page keeps the Mate line separate for that reason.
0i Mate control units
The seller publishes the 0i Mate as its own line inside the Series 0i family, including the Mate-TB and Mate-MB variants. Compact controls invite a particular mistake: assuming a Mate unit and a standard 0i unit are interchangeable because the names are close. They are not — the Mate is a distinct control with its own unit numbers, and the desk answers Mate inquiries from the Mate listings only. The one Mate unit the shop names outright is the A02B-0321-B500, listed as a used 0i Mate-TD controller.
Buyers working out which of the two lines is fitted can start from the Series 0i page, which sets the full 0i line beside the Mate, and from the generation guide on the blog.
Mate numbers in the catalogue
What the catalogue names for the Mate line.
| Unit | Position | Page |
|---|---|---|
| A02B-0321-B500 | 0i Mate-TD controller, listed used | Part page |
| 0i Mate (line) | Compact control line, incl. Mate-TB/MB | Series 0i |
| A02B number range | All control and display numbers in one table | A02B numbers |
Used Mate units and condition
The named Mate listing is a used unit, which is typical for this line: compact controls from retired machines form a large part of the Mate stock. Used here is a condition statement, not a warning — the unit is sold as a used original unit, tested before dispatch, and covered by the seller's warranty for used parts. The used FANUC parts page sets out the condition ladder and the checks to ask for, and they apply to a used control exactly as they do to a used amplifier.
Satellites of a Mate control
A Mate cabinet still has the same satellite families as a full control: boards, I/O units and a display, plus the drive chain underneath. A fault that presents as a control fault on a Mate machine is as likely to live in one of those, and the desk will ask which satellite the symptom points at. The operator's handwheel A860-0203-T001 is control-agnostic and is ordered off the feedback shelf for Mate machines as often as for any other.
Related pages
Send an inquiry
Send the part numbers you need, or the number of a unit you want assessed, with the machine each belongs to. One desk answers for the shelves and the bench.
Open the inquiry form