fanuc spare parts
FANUC spare parts catalogue
The whole catalogue on one page: eight FANUC part families for CNC machine tools, a robot-parts shelf beside them, and the repair and testing services that cover the same families. Every family link leads to its own page with the part numbers the catalogue carries.
What the catalogue covers
The catalogue is a replacement-parts catalogue, not a machine catalogue. It covers the electronic units a FANUC-controlled machine tool is built from: the control, the drives, the motors, the feedback devices, the boards, the I/O, the display and the power supply. A second, smaller shelf covers FANUC robot parts — motors, power supplies, wrists, balancers, reducers and the teach pendants that operate the robot. Complete machines and complete robots are not sold here.
Each family page lists part numbers exactly as the seller publishes them, and the numbers with their own detail pages are linked from the tables below and from the family pages. Where a family is wide — amplifiers, for example — a series page groups the numbers by prefix so a buyer holding any A06B number can find its neighbours.
The eight families
Families are ordered the way a control is assembled, from the control unit out to the axes.
| Family | What it covers | Page |
|---|---|---|
| CNC controls | Series 0i, 16/18/21, 30i/31i/32i and Power Mate control units | Controls |
| Servo amplifiers | AC servo drives and A06B servo amplifier modules | Servo amplifiers |
| Spindle amplifiers | AC spindle drives and spindle amplifier modules | Spindle amplifiers |
| Servo motors | AC servo motors, with A06B motor numbers | Servo motors |
| Spindle motors | AC spindle motors | Spindle motors |
| Encoders | Encoders, pulse coders and manual pulse generators (A860) | Encoders |
| PCBs | Servo, spindle, CPU, axis, motherboard, ROM and graphics boards | PCBs |
| I/O units | Module I/O and PCB I/O units | I/O units |
| Displays | CRT, LCD, LCD/MDI and Panel i displays | Displays |
| Power supplies | Power supply units, resistors, input units, reactors | Power supplies |
| Robot parts | Robot motors, power supplies, RV reducers, wrists, balancers, grease | Robot parts |
| Teach pendants | Teach pendants for FANUC robot controllers (A05B) | Teach pendants |
Condition across the catalogue
Shelf stock is original FANUC stock, and each line carries the condition the seller lists for it: new, new-surplus, or used. The words are kept exactly as the seller uses them, and the used FANUC parts page explains the condition ladder and the checks a buyer can ask for — including a test of the unit and a test video before dispatch. A line listed as used is never redescribed as new anywhere on this site, and a buyer who will only accept new stock should say so in the inquiry so the desk answers from the right shelf.
Repair sits beside the catalogue
Every family in the table is also a repair family. The repair service takes in failed amplifiers, motors, boards, controls and pendants; the test bench exists to find the faulty component before a repair is quoted. For a stopped machine that means the catalogue question and the repair question can be asked together, and the answer can mix the two: replace the unit that is beyond repair, repair the one that is not. The business behind the shelves and the bench is described on the about page.
Related pages
Send an inquiry
Send the part numbers you need, or the number of a unit you want assessed, with the machine each belongs to. One desk answers for the shelves and the bench.
Open the inquiry form