a06b-6117-h304
FANUC Servo Driver A06B-6117-H304
A06B-6117-H304 is a FANUC servo driver that the seller's shop lists with an explicit new-or-used condition framing. This page records that listing and how the two condition routes are handled.
What A06B-6117-H304 is
A06B-6117-H304 is a servo driver — the servo amplifier module for a feed axis — from the A06B family. Its shop listing is unusually explicit about condition: the unit is offered as new or used, in the listing's own words. That makes this page the natural place to explain how the desk handles a number that lives in both conditions at once, without pretending the two are the same product.
On the servo amplifiers shelf it sits among the 61xx-group modules; the A06B table shows its neighbours, including the combined A06B-6110-H015 unit that shares its group digits and its cabinet space.
Where A06B-6117-H304 works
The unit drives one servo axis under the control's command, fed from the shared power supply and coupled to a servo motor with its feedback device. Its failure shape is the single-axis stop: the machine lives, the axis does not. As with every amplifier, the neighbouring links — motor, encoder, supply — can imitate the fault, and the symptom pattern in the inquiry is what separates them.
Cabinets holding this group often hold its spindle counterpart too. Reading the label of the failed unit itself, rather than its neighbour's, is the whole game with the 61xx group; the suffix H304 is part of the name, not a footnote.
New or used: the A06B-6117-H304 listing
The listing states new-or-used, so the honest answer to the condition question is: both routes exist for this number, and the inquiry should name the one wanted. A new unit carries the seller's warranty for new parts — 1 year. A used unit carries the used-parts warranty of 3 months and a lower claim on the buyer's budget, tested before dispatch either way. The used FANUC parts page explains what used does and does not mean here.
Nothing in the new-or-used framing upgrades a used unit: when the shelf unit is used, the answer says used, and the test evidence offered is the same evidence the desk offers on any used amplifier — a bench run and a test video on request.
Testing A06B-6117-H304 before dispatch
Both conditions pass through the same bench gate. The unit is powered and run on the test bench, and its tested state — not its label — is what the dispatch decision rests on. For a used unit this matters doubly, since its previous service is unknown to buyer and seller alike until the bench run speaks.
A failed unit of this number is a standard repair intake: diagnosis first, repair priced on the finding, and the shelf's new and used units standing as the alternatives the buyer can weigh against the repair in the same exchange.
Ordering A06B-6117-H304
Quote A06B-6117-H304 in full, name the axis and machine, and state the condition wanted — new, used, or either with the test evidence deciding. If the failed unit is still in the cabinet, its label photograph read into the message settles the number beyond transcription doubt, which is the commonest silent error in amplifier orders across every group on this shelf.
Related pages
Send an inquiry
Send the part numbers you need, or the number of a unit you want assessed, with the machine each belongs to. One desk answers for the shelves and the bench.
Open the inquiry form