a06b-6132-h002
FANUC Servo Amplifier A06B-6132-H002
A06B-6132-H002 is a FANUC servo amplifier unit carried in the seller's shop listings. This page records its place in the servo amplifier family and how an order for this number is checked and tested.
What A06B-6132-H002 is
A06B-6132-H002 is a servo amplifier unit from FANUC's A06B drive family — the module that takes motion commands from the CNC control and delivers controlled current to one servo axis. It reaches this catalogue through the seller's shop, which lists it plainly as a servo amplifier unit, and it sits on the servo amplifiers shelf among the deepest group of numbers in the building.
The number is a FANUC part number for a genuine FANUC unit. The H002 suffix completes the identity: the desk answers for A06B-6132-H002 as a whole number, not for the 6132 group in general.
Where A06B-6132-H002 works in the drive chain
In the cabinet, a servo amplifier sits between the control above it and the servo motor below it, fed by the shared power supply. Its failure stops one axis while the rest of the machine stays alive — the classic single-axis stop that sends a buyer to this page. The A06B series page shows this unit among its neighbours, which matters because cabinets often hold several amplifier groups side by side.
Before condemning the amplifier, the chain deserves one pass: the motor and its encoder behind it, and the supply in front of it, produce look-alike alarms. The symptom written into the inquiry — which axis, at move or at standstill, under load or at power-up — is what lets the first answer aim at the right link.
Condition options for A06B-6132-H002
Amplifier stock turns over in all three of the seller's conditions — new, new-surplus and used — and the listing for this number does not pin one word to it permanently. The condition of the unit currently on the shelf is stated when the inquiry is answered; a buyer who accepts only one condition should say so up front, and the answer will come from the matching shelf.
The condition ladder and its checks are laid out on the used FANUC parts page. For an amplifier, the buyer's-side checks that matter are the pre-dispatch test and the test video, both of which the service offers as standard practice.
Testing A06B-6132-H002 before dispatch
Shelf amplifiers are run before they ship: powered on the bench, driven through the seller's standard goods test, and supplied with a test video when the buyer asks for one. The test bench page explains the diagnosis side of the same bench — the process that separates a dead amplifier from one with a single failed stage inside it.
A failed A06B-6132-H002 coming back the other way is a repair candidate. Buyers commonly ask for the shelf price and the bench assessment in one message, and the desk answers both against the same number.
Ordering A06B-6132-H002
Quote the complete number, A06B-6132-H002, with the axis the unit drives and the machine it belongs to. If the label is heat-damaged — common on amplifier doors — read what remains and name the neighbouring units' numbers as landmarks; the A06B group table is organised so a partial number with neighbours can still be reconciled. State the condition you will accept and whether a test video is wanted, and the inquiry is complete.
Related pages
Send an inquiry
Send the part numbers you need, or the number of a unit you want assessed, with the machine each belongs to. One desk answers for the shelves and the bench.
Open the inquiry form